Stanhope-Seta

stanhope seta

http://www.stanhope-seta.co.uk

34100-2 AUTOMATIC-PENSKY-MARTENS CLOSED CUP FLASHPOINT TESTER

TEST METHOD: ASTM D93; E502; IP 34; IP 404 (obs); BS 2000 Parts 34 & 404 (obs);
  • Procedures A, B and C
  • Flexible automated search mode
  • Ambient to 400°C temperature range
  • Gas or electric ignition
  • Independent fire detector
  • Barometric Correction: Automatic
  • Post Test Cooling: Fan assisted
  • Temperature Probes: Class A Platinum Resistance Thermometer


34200-0 AUTOMATIC-ABEL CLOSED CUP FLASHPOINT TESTER

TEST METHOD: IP 170; IP 304
The Abel Closed Cup Module comprises a Test Area, DIPS pod (Dipping, Ignition, Pilot, Stirrer), flash detector, sample temperature probe, outer and inner bath temperature probes and all necessary cables to interconnect with the 34000-0 Universal Base Unit.
  • Equilibrium tests
  • Flexible automated search mode
  • Ambient to 93°C (5°C to 93°C with optional cryostat)
  • Gas or electric ignition
  • Barometric Correction: Automatic
  • Post Test Cooling: Fan assisted or Circulating liquid/external cryostat (optional)


34300-0 AUTOMATIC – CLEVELAND OPEN CUP FLASHPOINT TESTER

TEST METHOD: ASTM D92; IP 36
  • Flexible automated search mode
  • Ambient to 400°C temperature range
  • Gas or electric ignition
  • Post Test Cooling: Fan assisted or forced air (requires 34008-0 Cooling Boost Module option).


34400-0 AUTOMATIC TAG CLOSED CUP FLASHPOINT TESTER

TEST METHOD: ASTM D56, D3934, D3941
The TAG Closed Cup Module comprises a Test Area, DIPS pod (Dipping, Ignition, Pilot, Stirrer), flash detector, sample temperature probe, bath temperature probe and all necessary cables and pipes to interconnect with the 34000-0 Universal Base Unit and 34008 Cooling Boost Module.
  • Equilibrium tests
  • Non-equilibrium tests
  • Ambient to 93°C (5°C to 93°C with optional cryostat)
  • Gas or electric ignition
  • Barometric correction: Automatic
  • Post test cooling: fan assisted or circulating liquid/external cryostat.


[TOP]
82000-0 SETAFLASH SERIES 8 CLOSED CUP TESTER (AUTOMATIC)

TEST METHOD: ASTM D3278; D3828; D7236; E502; IP 523; IP 524; IP 534; ISO 3679;
The Series 8 is an automated closed cup flash point tester with a temperature range of ambient +5 to 300C (ambient +9 to 572C. The instrument uses an electric hot wire ignitor (gas flame option).
  • Ambient +5 to 300°C
  • Small sample size, 2 or 4ml
  • Electric ignitor (with gas option)
  • Automatic dipping and flash detection
  • 64 Test Memory & RS232 Interface
  • Integral Barometer & Auto Correction


[TOP]
82100-0 SETAFLASH SERIES 8 ‘ACTIVECOOL’ CLOSED CUP TESTER (AUTOMATIC)

TEST METHODS: ASTM D3278; D3828; D7236; E502; IP 523; IP 524; IP 534; ISO 3679;
An automated closed cup flash point tester with a temperature range of 10 – 130 C with no external cooling required. When connected to a suitable water supply, the range is extended down to -20C.
  • -20 to 130°C temperature range
  • Small sample size, 2 or 4ml
  • Electric ignitor (with gas option)
  • Automatic dipping and flash detection
  • Electronic Peltier cooling
  • 64 Test memory & RS232 interface
  • °C or °F temperature display.


[TOP]
33000-0 SETAFLASH SERIES 3 PLUS CLOSED CUP TESTER

TEST METHOD: ASTM D3278; D3828 ; D7236; E502; IP 303 (obs); IP 523; IP 524; IP 534; ISO DIN 3679; ISO 3680; BS EN 456; BS 3900 Part A13
An easy to use instrument that can complete a flash/no-flash test in less than two minutes, or determine the flash point of a sample within a temperature range of 0 – 300C in typically 8 minutes.
  • Ramp mode for ASTM D7236 & IP 534
  • Flash point test in less than 2 minutes
  • Small sample size – 2 or 4ml
  • Ambient to 300°C temperature range
  • Automatic flash detection
  • Audible and on-screen prompts.


[TOP]
33200-0 SETAFLASH SERIES 3 ACTIVECOOL

TEST METHOD: ASTM D3278; D3828 ; D7236; E502; IP 303 (obs); IP 523; IP 524; IP 534; ISO DIN 3679; ISO 3680; BS EN 456; BS 3900 Part A13;
Active Cool is the latest instrument in the Setaflash Series 3 range. It has been designed to rapidly and efficiently carry out Flash/No Flash tests and to determine the flash point of liquids and semi-solids in the 10 to 130C temperature range.
  • Flash/No Flash and Ramp modes
  • 10 to 130°C temperature range
  • Flash point test in less than 2 minutes
  • Small sample size (2 or 4ml)
  • Automatic flash detection
  • Electronic peltier cooling
  • Audible and on-screen prompts


[TOP]
80000-0 SETAVAP ANALYSER

TEST METHOD: ASTM D5188; D5191; IP 394; IP 409; EN 13016-1;EN 13016-2 (37.8°C)
Correlates with: ASTM D323; D2533; D4953; D5482; D6378; IP 69; IP 402 (obs); ISO 3007; EN 12 (obs); JIS K2258; NF M07-079
An automatic multi-mode vapour pressure tester with a pressure range of 0 – 700kPa (0 to 100 psi) and a temperature range of 25°C (45°F) below ambient to 100°C (212°F).
  • Test Temperature Range: 25°C below ambient to 100°C (45°F below ambient to 212°F)
  • Temperature Resolution: 0.1°C (0.2°F)
  • Test Pressure Range 0 to 700kPa
  • Pressure Resolution: 0.1kPa (0.1psi)
  • Reid Mode: Display shows RVP equivalent
  • Chamber Volume: 15ml }1%
  • Vacuum Requirement:: better than 0.01kPa (abs)
  • Computer Interface: RS232C


[TOP]
81000-2 SETAVAP 2

TEST METHOD: ASTM D5191; IP 394; IP 409 (37.8°C); IP 481; EN 13016-1; EN 13016-2 (37.8°C)
Correlates with: D323; D4953; D5482; D6378; IP 69; IP 402 (obs); ISO 3007; EN 12 (obs); JIS K2258; NF M07-079
  • Rapid automatic vapour pressure testing
  • Automatic drain and purge
  • “Mini” method uses only 3ml sample size
  • Selectable units – kPa or psi
  • Results available as Ptot, DVPE, EPA, Crude, Pabs
  • Audible and on-screen prompts
SPECIFICATIONS
Test Temperature: 38.7°C (100°F) } 0.1°C
Test Pressure Range: 0 to 200kPa } 0.5kPa (0 to 29psi } 0.1psi)
Pressure Resolution: 0.1kPa (0.1psi)
Vapour to Liquid Ratio: 4:1
Display Units of Pressure: kPa or psi (User selectable)


[TOP]
17190-2 SETA UNIVERSAL PENETROMETER WITH INTEGRAL CONTROLLER

TEST METHOD: ASTM D5; D217; D937; D1403; D1321; D1831; D2884; IP 49; IP 50; IP 179; IP 310; IP 376
A semi-automatic penetrometer with a range of 0 – 40 mm (400 Pen). Plunger release and retention is controlled by a solid state timer which can be set for penetration times of 5, 8, 10, 12, 30 and 60 seconds.
  • Penetration range 0 to 400 Pen (40mm)
  • 5, 8, 10, 12, 30 and 60 second timer settings
  • Solid state timer
  • Automatic plunger release and retention
  • Flexi light
  • Calibration and verification materials
  • Setaplus extended warranty available.


[TOP]
94100-3 SETA COMPACT CLOUD AND POUR POINT CRYOSTAT

TEST METHOD: ASTM D97; D2500; D5853; IP15; IP219; IP441

SPECIFICATIONS

  • Compartment Quantity: 3
  • Compartment Volume: 2 litre
  • Total Test Positions: 12
  • Temperature Range: Ambient to -34°C
  • Ambient Temp Range: 15°C to 32°C


[TOP]
84200-0 SETA KV-6 VISCOMETER BATH

TEST METHOD: ASTM D445; D446; D2170; D2270; IP 71; IP 226; IP 319; BS 188
  • Up to 6 viscometer tubes
  • 50 litre oil/water bath
  • Temperature range ambient to 150°C
  • Digital display with 0.01°C resolution
  • Toughened glass front panel
  • Integral back lighting.


[TOP]
90000-3 SETA OIL TEST CENTRIFUGE

TEST METHOD: ASTM D91; D96 (obs); D893; D1290; D1796; D1966; D2273; D2709; D2711; D4007; D5546; IP 75 (obs); IP 359; BS 2882 (obs); ISO 3734
Seta Oil Test Centrifuge is a microprocessor controlled, heated centrifuge manufactured exclusively for Seta. The instrument is fully programmable allowing automatic configuration to the specified oil test parameters.
  • Heated chamber, ambient to 80°C
  • 4 place swing out rotor
  • Microprocessor control with 99 programme memory
  • Membrane ‘touch’ control panel
  • Pre-heat facility to ensure bowl is at test temperature prior to test
  • Universal buckets for 12.5ml, 6 and 8 inch glassware
  • Static, near vertical bucket positioning
  • Conforms to safety requirements IEC 1010-1; 1010-2-D.


[TOP]
14020-5 SETAFOAM DUAL TWIN FOAM TEST BATHS

TEST METHOD: ASTM D892; IP 146; BS 2000 Part 146; ISO 6247; NF T60-129;
A pair of highly transparent water baths for detecting foaming characteristics in lubricating oils, which could cause inadequate lubrication, overflow and cavitation.
  • High and low temperature baths
  • Temperature range ambient to 100°C
  • Up to two simultaneous tests per bath
  • Two pre-heating stations per bath
  • Integral flowmeters and regulators
  • Two integral normalising coils
  • Calibration and verification materials
  • Setaplus extended warranty available.


[TOP]
16120-2 SETACLEAN TOTAL SEDIMENT TESTER

TEST METHOD: ASTM D4870; IP 375; IP 390 (Procedure A); ISO 10307
A compact bench-mounted unit for determining the insoluble material content of distillate and residual fuel oils.
  • Measures sediment up to 0.5%m/m
  • Sample viscosities up to 130mm2/s
  • 10g sample size
  • Two test stations
  • Setaplus extended warranty available.


[TOP]
94830-3 SIMAIR LOW TEMPERATURE BATH

TEST METHOD: ASTM D2983; IP 267 Method A*
A liquid filled, refrigerated viscometer bath that, when used in conjunction with patented SimAir® test cells and a Brookfield LV type rotational viscometer, meets the requirements of tests to ASTM D2983.

SPECIFICATIONS

  • Temperature range: -40 to +30°C
  • Temperature stability: ±0.1°C
  • Bath type: Liquid
  • Test cell capacity: up to 12.


[TOP]
92000- 3 IGNITION QUALITY TESTER (IQT™) 

TEST METHOD: EN 15195: 2005(E); ASTM D6890; IP 498;
Specifications EN 590; ASTM D975; D6751; D7467;BS 2869
Correlates with ASTM D613
A reliable, affordable, more precise, and quiet alternative to a cetane engine. It is a fully automated test instrument for deriving the cetane number for a wide range of middle distillate fuels including conventional and oil sands-based diesels, biodiesels, refinery streams, plus fuels using oxygenate and nitrate based cetane enhancers.
  • Automated test procedure
  • Precise results – Repeatability of 0.92, Reproducibility 2.69 @ 52 CN
  • Optimise refinery blending
  • Tighter control of cetane additives
  • Minimize ‘give away’
  • Small (
  • Fast analysis (
  • Durable tough instrument (some instruments have 20,000 tests)
  • Fully approved and specification compliant
  • Suitable for use with B100.


[TOP]
91600-3 SETA MFT MULTI FILTRATION TESTER

TEST METHOD: ASTM D2068; IP 387 (Procedures A, B & C);
Correlates with ASTM D6426 (COLD SOAK); IP PM EA/08
The Seta Multi Filtration Tester is a unique and flexible instrument designed to test distillate fuels including gas oil, gas turbine fuel, kerosine, diesel, biodiesel and biodiesel blends.
  • Portable test for filterability/blocking tendency of Fuel Oils
  • Testing of Bio components including FAME material and cold soak testing
  • Easy to use, fully automated operation
  • Results in less than 15 minutes
  • Automatic calculation of FBT and F-QF
  • Simple calibration/verification of flow, pressure and temperature
  • Downloadable Filterability Graph


[TOP]
10400-0 SETA SMOKE POINT APPARATUS

TEST METHODS: ASTM D97; ASTM D2500; ASTM D5853; IP 15; IP 219; IP 441; BS 2000 Parts 15 & 219; ISO 3015; ISO 3016; EN 23015; DIN 51 597 (obs); NF T60-105; FTM 791 201; JIS K2269
An instrument for determining the smoke point of kerosine and aviation turbine fuel by measuring the maximum flame height prior to smoke formation and comparing the resultswith those of known standards.

  • Calibration and verification materials


[TOP]
11400-6 SETA COPPER/SILVER CORROSION BATH

TEST METHOD: ASTM D130
The 11400-6 is an oil filled bath with a maximum temperature of 150°C and nine test stations. The bath is protected against over-temperature and low fluid level.

A Silver Corrosion Conversion Kit (11510-0) is available to provide coolant flow to six sets of silver corrosion glassware (11430-0).

  • Biofuel testing
  • Ambient +5° to 150°C temperature range
  • Copper and silver corrosion tests
  • 9 test stations
Click here for more information…


[TOP]
12200-3 SETA EXISTENT GUM SOLID BATH

TEST METHOD: ASTM D381-IP 131; IP 540; BS 2000 Part 131; BS 4348 (obs); ISO 6246; DIN 51 784; NF M07-004; FTM 791 3302; JIS K2261
A solid block bath designed to carry out up to five simultaneous tests for determining existent gum content in fuels by the Jet Evaporation method.
  • 5 Test stations
  • Integral steam superheater
  • Digital temperature control
  • 140 to 260°C temperature range
  • Flow gauge calibrated for air and steam
  • Calibration and verification materials
  • Setaplus extended warranty available.
Click here for more information…


© 2011 Monitoring & Control Laboratories (Pty) Ltd. Suffusion theme by Sayontan Sinha